If you are looking to install pavers in your house, then there are a lot of good options available out there. From bricks to cobblestone, you can explore several different pavers out there and can choose the one that suits you the best. The most popular type of pavers most people use is travertine pavers. They are made of marble and are available unique designs that can fit well in any place. When it comes to installing travertine pavers, it is a delicate process. It is recommended that you hire a professional to install them, so you don’t face any issues. However, if you are confident enough, you can install them yourself as well. Below I have mentioned a few tips that will assist you in installing travertine pavers. Let’s take a look:
Layout Dry to Check the Design
The first thing you need to do is put your travertine pavers on dry concrete and find out the pattern by moving the pieces. This will help you figure out whether some of your travertine pavers need cutting or not. Once you have found the right placement measure and mark travertine pavers and cut them accordingly. It is important for you to purchase your travertine pavers from a good company so that the tiles don’t break during the cutting process. You can also request a quote for travertine pavers from a reliable company by browsing over to this link.
Cover All the Holes on the Surface
If there are holes on the surface of your concrete, then you need to either fill them or patch them. There are a lot of concrete patching products available out there, and you can find them easily at any hardware store. You can consider filling the holes as well with more concrete, but that can get a bit messy and is more time-consuming. Concrete patches are easier to use, and they are much better adhesive as well.
Prepare the Right Amount of Mortar
After covering the holes, you will have to prepare the mortar, which you must do outside and in a place that can hold the entire bag. Wheelbarrow works great for mortar mixing, and it saves you from making a mess as well. It is better that instead of making mortar in patches, you make the entire bag at once because you won’t know how much mortar you will need for the small sections, and this can help you save time. Once you have made the mortar, spread it with the help of a trowel carefully and move on to the next step.
Placing the Travertine Pavers
When you are placing the travertine pavers on the concrete, you need to do it slowly. Once you have spread the mortar, get a smaller trowel, and use it to spread the mortar on the back edges of the tiles. That way, the tile will create a strong bond with concrete and mortar and won’t come out easily. Do the process with patience and let it dry for a while.