Are you dealing with blocked drains? Well, every homeowner will have to handle blocked drains at some points. The good thing is that you can fix things early on before they get out of hand. Chief among the warning signs you should pay attention to include unpleasant odour and strange noises. You might also be facing a clogged drain if it does not drain water as fast as it used to. Get ready to work on your blocked drains before you have to deal with burst pipes.
You have probably tried to remove the gunk and hair on the surface to no avail. Maybe a plunger isn’t getting the job done. Here are four easy ways to unblock a drain.
Baking Soda and Vinegar Most of us have baking soda and vinegar at home. Well, these two kitchen essentials can come to the rescue. All you have to do is mix 1/3 cup of vinegar with a 1/3 cup of baking soda. You can use a measuring cup to make things easier. The mixture should fizz immediately and should pour it down the drain quickly. The fizzing action is responsible for unsettling the gunk and hair in the pipe. Let the sink sit for over an hour. However, it would be best to leave it overnight if you can. Remember to pour hot water over the drain before using it again.
You can pour dry baking soda on the drain first before pouring the vinegar if you cant find your measuring cup.
- Use a Bent Wire Hanger
Yes, you had it right! Using a bent wire hanger can do the magic for you. All you will need to do is to take your typical hanger and straighten it out. Proceed to bend one end over so that it looks like a hook. Once you are done, gently push it down the drain cover and start pulling gunk and hair out. Remember to pull out as much residue as you can. Never push the waste further as it can lead to more problems. After getting as much gunk and hair as you possibly can, flush the drain with hot water to clear the pipes.
- Boiling Water
You can still unblock the blocked drains kent even if you do not have a bent wire hanger. Boil enough water as you usually do and pour it down the drain slowly. Give the water enough time to work before the next pour. This method will save you time and money.
- Wet and Dry Vacuum
Do you have a wet and dry vacuum? Well, you are in luck if you answered yes. Begin by setting it to remove liquids before covering the vent to avoid a mess. You can use an old plunger to create a strong seal. Turn the vacuum on and watch as it pulls the clog out of the sink and into the vacuum bag.
Although these quick fixes can help you unblock a block, using a drain unbloc will save you time. It will also save you money since you can avoid unnecessary expenses.