KitchenAid refrigerators are one of a kind. They help keep food and ingredients fresh for long periods. These refrigerators have water filters that require replacement from time to time. Replacement filters are specially designed to eliminate potentially harmful contaminants, and minerals found in water and prevent them from entering your refrigerator. The contaminant removal process also reduces refrigerator maintenance costs while ensuring the incoming water is healthy and better-tasting for the whole family.
Discount Filters deals in filter products for appliances, spas, pools, water, and air purification. One of their bestselling products is the KitchenAid refrigerator water filter replacement. The KitchenAid is owned by Whirlpool, a distinguished brand renowned for its impressive selection of stand mixers and kitchen appliances. Check more from Whirlpool at Discount Water Filters.
Essential Facts You Need to Know About KitchenAid Refrigerator Water Filter
KitchenAid refrigerators are renowned for their dependable performance and extensive feature set. But a common query is whether installing a water filter is necessary for KitchenAid refrigerators to operate effectively. The short answer is that any refrigerator that delivers water or ice needs a filter installed, and KitchenAid refrigerators are no exception. You can ensure that your refrigerator gives you ice and clean, hygienic water by using the proper filter.
1. Reduces impurities in the drinking water source and produces water with excellent taste
Installing a KitchenAid Refrigerator Filter will enhance the flavor of the drinking water and ice you get right from the refrigerator. If your refrigerator cartridge filters are not correctly placed, the water from your KitchenAid refrigerator may be contaminated with pathogens. They are made to eliminate pollutants, toxins, and particles from your water for a better drinking experience with higher-quality water.
2. It stops you from ingesting toxic substances that are bad for your health
Life-threatening conditions and illnesses like Salmonella, diarrhea, hepatitis A, and giardiasis are less likely to affect your family and water filters.
3. The KitchenAid water filter should be changed every six months or as needed when the indicator light turns on
Suppose the water filter needs to be regularly maintained. In that case, there will be a reduced water flow to the ice maker and dispenser due to a blocked or improperly placed water filter may result in smaller ice cubes, lower ice production, and longer dispensing periods. A clogged filter won’t result in sluggish water dispensing or inadequate ice production.
4. There is no need to use an internal filter if you have reverse osmosis filtration in your house
If your home has a reverse osmosis filtering system, there is no need to use the refrigerator’s internal water filter. The internal water filter and the reverse osmosis system both have the potential to lower water pressure, reducing the flow of water from the dispenser. Your water will be of a very high standard, depending on the kind of filtration system you use.
5. Check to see whether the water supply line has any leaks
The direction of the water flow may change because of a kink in the line. Correcting the water source line allows you to get appropriate water pressure and flow again. If the water dispenser on your KitchenAid refrigerator is functioning abnormally and has low water pressure, this could be the root of the issue. Also, if your KitchenAid refrigerator’s water and ice dispensers aren’t functioning correctly, you should check to determine whether the door switch is broken.
Here’s how to change the water filters on your KitchenAid refrigerator:
Water Filter 1 (Model EDR1RXD1)
Start by locating the water filter cover on the upper right-hand corner of the refrigerator.
- Lift the filter door gently.
- Carefully pull the filter out and discard it safely.
- Uncover the protective sheath from the O-rings of the new filter.
- Place the new filter in the right slot. Ensure the arrow is pointing upwards.
- While inserting or sliding the new filter into position, the door will slowly shut down. If the filter placement proves problematic, rotate it accordingly until the notches are aligned with the groove.
- Close the filter door until it snaps inside.
- Once the filter is replaced, allow up to 4 gallons of water into the line to flush the filter.
Water Filter 2 (Model: EDR2RXD1)
Begin by locating the water filter cover inside the upper deck of your refrigerator.
- Open the filter door.
- Remove the filter while it is angled downwards. Do this gently by turning the filter left before pulling. And safely discard the old refrigerator filter.
- Remove the orange cap in the new filter as well as the protective lining from the O-rings.
- Align the new filter into the slot and insert it. Check to make sure the arrow is pointing upwards.
- Close the filter door until it snaps inside.
- After replacing the filter, allow up to 4 gallons of water through the line to flush the filter.
Water Filter 3 (Model: EDR3RXD1)
First, locate the water filter inside your refrigerator.
- Release the filter by pressing the eject button. Turn the black filter cap clockwise to unlock, and then discard.
- Also, remove the spent filter and discard.
- Disentangle the blue cap in the new filter and check if the O-rings are in place.
- Place the black filter cap over the new cartridge and ensure the ridges are well-aligned. Lock the lid in a clockwise direction.
- Position the new filter with the arrow pointing up and insert it gently into the placement slot.
- Carefully push the filter inwards until the eject button pops out.
- Run a few gallons of water through the line to flush the newly installed filter.
Water Filter 4 (Model: EDR4RXD1)
Locate the water filter covering inside the refrigerator.
- See if your refrigerator’s filter cap is facing outward. If so, push it and press the cover down. If the tab is on the bottom cover, open it with the help of a small lever.
- Turn the filter to your left, pull it out, and discard.
- If the filter has been replaced previously, turn the cap inside the filter slot counter-clockwise and pull it out.
- Before inserting the new filter into the allocated slot, ensure the grooves are well-aligned. Then it pushes inside and turns it right.
- Push the filter up to secure it in place.
- And then push the filter door up to close.
- Flush the new filter by running up to 4 gallons of water through the line.
Water Filter 5 (Model: EDR5RXD1)
Begin by locating the water filter cartridge cap in your refrigerator. Check the left side of your refrigerator base grille.
- Remove the cap by rotating it in a counter-clockwise direction. Once the handle is vertical, pull it straight out.
- Slide the cap off the end of the filter and remove it. Discard the old filter but retain the
- Open the new filter and uncover the protection from the O-rings.
- Ease the cartridge cap onto the edge of the new filter.
- Insert the new filter into place and ensure the cap handler is vertically placed.
- Rotate the filter cap until it stands horizontally.
- Run a few gallons of water through the line to flush the filter.